Workshop Tools
Woodshop BenchesWorkshop Tools
Woodworking tools you need depends largely on the type of items you want to do.
If your main interest is the configuration of wood, then you will need a ride. What other tools you need depends on exactly what we do with the songs that you did during the tour.
There are general tools that are needed, no matter what you do – the wood must be cut smooth and combined.
Tools
Most people have developed different tools for small jobsaround the house – a screwdriver, a drill, command buttons, etc. are needed for carpentry general, with specialized tools for the purchase of a variety of more advanced uses. At the bottom of this article is a list of common tools useful – it gives you an idea of where to start – you can buy more than necessary. As the work progresses, you know when you need a new tool that will make the job easier or faster.
Power Tools
Power tools can save time and effort. Aelectric drill and a jigsaw are always useful, although you wont make much with just these two. A circular saw gives a straight clean cut quickly, and works well in a range of materials from thin sheet material to heavy timber. A power plane and belt sander are also very good and can save a lot of time. A router is very useful for many jobs.
Work Bench
The major item of most workshops is usually the workbench. Here is where the parts are made, clamped and worked on, and finally assembled. Position the bench to allow access from all sides. Leave room to manoeuvre the work to and from the bench.
I like the old kind of bench design, with a solid plank either side, and a low central storage area for the tools you are currently using, and storage cupboards underneath.
With a vice and planing stop, – and made rock solid and built to resist the stresses of hand planing.
Storage
I find that there are so many items needed in a workshop that storage is most important. A tool may not be used for months, and time is saved if a great search is not required.
If you have arranged separate work areas for sawing, routing, drilling etc, the tools required for this work can be arranged in these areas. Some tools will be used in more than one area, and could be duplicated, or shared. Use shelves and racks, glass jars for nails and screws, so you can see where things are
Useful sites
The internet is rich in information about tools for woodwork. Many sites include photographs, which can be useful if you are either trying to find the name of a tool, or find out what a particular tool looks like.
List of tools
Bradawl; Various Chisels; Various Drill bits, Flat bits, Countersink bit; Various Clamps G and Bar; Saws: Tenon, Coping, Cross Cut/Rip; Various Hammers; Mallet; Pincers; Various Screwdrivers; Gauges Marking, Mortise; Try square; Adjustable bevel; Various Scrapers; Oilstone; Steel Tape Rule, Steel Ruler; Various Nail Punches; Marking Knife; Smoothing Plane; Other planes: Plough, Rebate.
More interesting Woodworking stuff
Woodshop Benches